ANSYS Training: A Easy Introduction with Applications
 Description
 Curriculum
 FAQ
 Reviews
Ansys Workbench is a generalpurpose Finite Element Analysis (FEA) software that is widely used in the Industry and Academia to solve many different engineering problems through a virtual simulation of the Engineering Designs under consideration.
Ansys Workbench is applied to virtual simulate the product operating conditions and helps us to understand its behavior and helps us achieve very good design through simulation and optimization even before the product has been manufactured.
Using Ansys Workbench software we can Simulate problems from Different fields such as Structural, Vibrations, Heat transfer, Fluid Flows, and many more types.
This course is all about learning and completing the Essential training required for effective usage of the Ansys Workbench Software so that by the end of the course you will be able confidently to perform Meshing of geometries, Static Structural, Modal, Thermal, Thermostructural, buckling analysis using this Ansys Workbench software. you will also get acquaintance with the Design Modeler, Ansys Mechanical, Ansys Engineering Data, and other important modules in Ansys Workbench Software.
This course is divided into Theoretical and Practical Sessions.
In the Theoretical session, you will be introduced to the basic theoretical concepts regarding the topics of FEA, Meshing, Static Structural, Modal, Thermal, Thermostructural, and buckling analysis.
In the Practical sessions, you will be using industrial and academic examples for learning how to apply Ansys Workbench software for efficiently performing different kinds of Simulations such as:
– Static Structural Analysis
– 3D Static Structural Analysis
– 2D Static Structural Analysis
– 1D Static Structural Analysis
– Modal Analysis
– Free Vibration Analysis
– Forced Vibration Analysis (PreStressed)
– Thermal Analysis
– Conduction Mode
– Convection Mode
– Radiation Mode
– Mixed Mode Heat Transfer
– ThermoStructural Analysis
– Buckling Analysis
– Structural Buckling
– Thermal Buckling
In addition to all of these analyses, you will learn about meshing and how to generate good mesh, use of Design Modeler Module, other important modules in Ansys Workbench software.
I hope you will join me in this course for learning more information about FEA analysis and Ansys Workbench software.

1Introduction to Finite Element Analysis  I
In this lecture, students will be introduced to the different ways for solving an engineering problems, different numerical methods and finally the concept of Finite Element Analysis.

2Introduction to Finite Element Analysis  II
In this lecture, students will be introduced to the different important terms like Degree of Freedom, Meshing and its importance and different types of basic elemental types.

3Introduction to Finite Element Analysis  III
In this lecture, students will be introduced to the procedure of solving a problem in manual ways and the industrial procedure of solving a problem using commercial FEAĀ software and finally they learn about the applications of Finite Element Analysis and Ansys Workbench.

4Introduction to Ansys Workbench Interface
In this lecture, students will be introduced to the Interface of Ansys Workbench Software.

5Unit systems in Ansys Workbench Software
In this lecture, students will be introduced to how to use the default unit systems and also create a new custom unit system inĀ Ansys Workbench.

6Saving Ansys Workbench files
In this lecture, students will be introduced to how to save the Ansys Files in the default project and Archive formats and also how to open these saved files.

7Introduction to Ansys Engineering data manager
In this lecture, students will be introduced to the Engineering Data Module inside Ansys Workbench Software.

8Adding custom Material to Ansys Engineering Data
In this lecture, students will learn how to add custom materials to theĀ Engineering Data Module inside Ansys Workbench Software.

9Accessing Engineering Material Libraries present in Ansys workbench
In this lecture, students will learn how to accesses default materials in theĀ Engineering Data Module inside Ansys Workbench Software.

10Introduction to Design Modeler in Ansys Workbench
In this lecture, students will be introduced to the Design Modeler module in Ansys Workbench.

11Using Sketching & Modelling tools in Ansys Workbench Design Modeler
In this lecture, students will be introduced to Sketching and Modelling Tools (Extrusion Tool) inside Design Modeler module in Ansys Workbench Software.

12Revolve, Sweep and Loft tools inside Ansys workbench Design Modeler
In this lecture, students will be introduced to Revolve, Sweep and Loft tools inside Design Modeler module in Ansys Workbench Software.

131D Modelling of a bicycle frame in Ansys workbench design modeler
In this lecture, students will be introduced to how to perform 1D Modelling through creating a Bicycle frame using Design Modeler in Ansys Workbench software.

141D+2D Hybrid body Modelling in Ansys workbench design modeler
In this lecture, students will be introduced to how to perform (1D + 2D)Ā Hybrid Modelling through creating a Two story building frame using Design Modeler in Ansys Workbench software.

15Reducing 3D object to 2D surface object using Ansys workbench design modeler
In this lecture, students will be introduced to how to reduce 3D Model to 2D surfaces using Design Modeler in Ansys Workbench software.

16Introduction to Theory of meshing
Students will be introduced to the basic concepts of Meshing.

17Meshing with Global mesh controls in Ansys workbench meshing module
Students will learn how to use Global mesh controls inside Ansys Workbench software.

18Meshing with Local mesh controls in Ansys workbench meshing module
Students will learn how to use Local mesh controls inside Ansys Workbench software.

19Mesh Testing using mesh quality metrics in Ansys Workbench
Students will learn about mesh quality metric used for testing the quality of mesh and will learn how to accesses those metrics inside Ansys Workbench software.

20Introduction to Static Structural Analysis Theory
Students will learn about the basic theory of what is Static Structural Analysis.

21Introduction to Static Structural Analysis in Ansys Workbench
Students will learn about the basic theory of about performing aĀ Static Structural Analysis inside Ansys Workbench software.

22Problem Description: Cantilever beam Analysis in Ansys Workbench
Description of the Cantilever Beam problem which will be solved in Ansys Workbench Software.

23Cantilever Beam analysis in Ansys  I
Students will perform the steps like geometry import and meshing steps using cantilever beam problem inside Ansys Workbench software.

24Cantilever Beam analysis in Ansys  II
Students will perform the steps of applying required loading and boundary conditions for theĀ cantilever beam problem inside Ansys Workbench software.

25Cantilever Beam analysis in Ansys  III
Students will perform the require results post processing for the cantilever beam problem inside Ansys Workbench software.

26Problem Description: Pneumatic Cylinder Cover Analysis in Ansys Workbench
Description of the Pneumatic Cylinder Cover problem which will be solved in Ansys Workbench Software.

27Pneumatic Cylinder cover analysis in Ansys workbench  I
Students will learn how to import the Pneumatic Cylinder Cover geometry, Apply material and then mesh the body using Ansys Workbench Software.

28Pneumatic Cylinder cover analysis in Ansys Workbench  II
Students will learn how to apply boundary conditions and loading conditions on the Pneumatic Cylinder Cover geometry and then solve the body using Ansys Workbench Software.

29Pneumatic Cylinder cover analysis in Ansys Workbench  III
Students will learn how to post process the results obtained from solving the Pneumatic Cylinder Cover problem using Ansys Workbench Software.Ā

30Pneumatic Cylinder cover analysis in Ansys Workbench  IV
Students will learn how to post process the results obtained from solving the Pneumatic Cylinder Cover problem using Ansys Workbench Software.Ā

31Problem Description: LED TV Stand Analysis in Ansys Workbench
Description of the LEDĀ TV Stand which will be solved in Ansys Workbench Software.

32LED TV Stand analysis in Ansys Workbench  I
Students will learn how to import LED TV Stand Model, apply material and then mesh the geometry in Ansys Workbench.

33LED TV Stand analysis in Ansys Workbench  II
Applying The boundary conditions and Loading conditions on the LEDĀ TVĀ Stand model in Ansys Workbench.

34LED TV Stand analysis in Ansys Workbench  III
Postprocessing of results of LEDĀ TV Stand problem in Ansys Workbench

35LED TV Stand analysis in Ansys Workbench  IV
Postprocessing of results of LEDĀ TV Stand problem in Ansys Workbench

36Problem Description: Clevis Pin Assembly Analysis in Ansys Workbench
Description of the Clevis Pin Assembly problem which will be solved in Ansys Workbench Software.

37Clevis Pin Assembly Analysis in Ansys Workbench  I
Import the Geometry of clevis pin assembly and apply materials and boundary , Loading Conditions in Ansys Workbench.

38Clevis Pin Assembly Analysis in Ansys Workbench  II
Postprocessing of Results ofĀ clevis pin assembly problem in Ansys Workbench.

39Problem Description: Fly wheel Analysis in Ansys Workbench
Description of the Fly Wheel problem which will be solved in Ansys Workbench Software

40Flywheel Analysis in Ansys Workbench  I
Preprocessing & solving of Flywheel problem in Ansys Workbench

41Flywheel Analysis in Ansys Workbench  II
Postprocessing of Flywheel problem in Ansys Workbench

42Problem Description: Gear & Rack Analysis in Ansys Workbench
Description of the Gear & Rack problem which will be solved in Ansys Workbench Software.

43Gear & Rack Analysis in Ansys Workbench  I
Students will perform the steps like geometry import and meshing steps for Gear & Rack problem inside Ansys Workbench software.

44Gear & Rack Analysis in Ansys Workbench  II
Students will be applying loading and boundary condition and solve the problem to calculate the moment required to apply the required forces at the end of the Rack using the Ansys workbench software.

45Gear & Rack Analysis in Ansys Workbench  III
Students will be applying loading and boundary condition and solve the problem to calculate the force required to apply the required moment at the gear using the Ansys workbench software.

46Problem Description: Bolt & Nut Analysis in Ansys Workbench
Description of the Bolt & Nut problem which will be solved in Ansys Workbench Software.

47Bolt & Nut Analysis in Ansys Workbench  I
Students will be preprocessing the Bolt and Nut analysis problem by performing the steps such as geometry import, applying loading and boundary conditions...etc. using Ansys Workbench.

48Bolt & Nut Analysis in Ansys Workbench  II
Students will be performing the meshing, solving and Postprocessing the results obtained from solving the Bolt and Nut analysis problem using Ā Ansys Workbench.

49Problem Description: Bookshelf Analysis in Ansys Workbench
Description of the Bookshelf problem which will be solved in Ansys Workbench Software.

50Bookshelf Analysis in Ansys Workbench
Solving the problem of Bookshelf design using Ansys Workbench software.

51Problem Description: Planar Truss Analysis in Ansys Workbench
Description of the Plane truss problem which will be solved in Ansys Workbench Software.

52Planar Truss Analysis in Ansys Workbench  I
Students will be modeling the planar truss which will be used for future analysis using design modeler module inside Ansys workbench software.

53Planar Truss Analysis in Ansys Workbench  II
Students will be performing the required preprocessing steps to solve the problem of planar truss using the Ansys Workbench software.

54Planar Truss Analysis in Ansys Workbench  III
Students will be performing the required postprocessing steps to solve the problem of planar truss using the Ansys Workbench software.

55Problem Description: High rise steel frame Analysis in Ansys Workbench
Description of the High rise steel frame problem which will be solved in Ansys Workbench Software.

56High rise steel frame Analysis in Ansys Workbench  I
Students will be performing the geometry import and correction for the high rise steel frame problem using Ansys Workbench Software

57High rise steel frame Analysis in Ansys Workbench  II
Students will solving the problem of high rise steel frame using Ansys workbench software.

58Problem Description: 1D + 2D Hybrid model Analysis in Ansys Workbench
Description of the 1D+2D Hybrid problem which will be solved in Ansys Workbench Software.

591D + 2D Hybrid model Analysis in Ansys Workbench I
Students will be solving the problem of Hybrid geometry using a model of two story building using Ansys Workbench software.

601D + 2D Hybrid model Analysis in Ansys Workbench  II
Students will be continuing the postprocessing of solution for the Hybrid geometry using a model of two story building using Ansys Workbench software.

61How to change the crosssection alignment and orientation in ANSYS workbench
This video lectures shows the procedure on how to edit the crosssection alignments and orientation in design modeler in ANSYS workbench software.

64Problem Description: Aeroplane Wing Modal Analysis in Ansys Workbench
Description of the airplane wing problem which will be solved in Ansys Workbench Software.

65Aeroplane Wing Modal Analysis in Ansys Workbench  I
Students will be performing the Modal analysis of the Aeroplane wing problem using Ansys workbench software.

66Problem Description: Audi car bumper modal Analysis in Ansys Workbench
Description of the Audi car bumper problem which will be solved in Ansys Workbench Software.

67Audi car bumper modal Analysis in Ansys Workbench  I
Students will be performing the Modal analysis of the Audi car bumper problem using Ansys workbench software.

68Problem Description: Prestressed Analysis of Machine Frame in Ansys Workbench
Description of the Machine frame problem which will be solved in Ansys Workbench Software.

69Prestressed Modal Analysis of Machine Frame in Ansys Workbench  I
Students will be performing the prestressed Modal analysis of the Machine frame problem using Ansys workbench software.

70Prestressed Modal Analysis of Machine Frame in Ansys Workbench  II
Students will be performing the Modal analysis of the Machine frame problemĀ using Ansys workbench software and and compare results with the prestressed modal analysis results.

73Problem Description: Composite Slab Analysis in Ansys Workbench
Description of the Composite slab problem which will be solved in Ansys Workbench Software.

74Composite Slab Analysis in Ansys Workbench
Students will be solving the problem of Composite slab in Ansys Workbench software.

75Problem Description: Aluminum Fin Tube Analysis in Ansys Workbench
Description of the Aluminium fin tube problem which will be solved in Ansys Workbench Software.

76Aluminum Fin Tube Analysis in Ansys Workbench
Students will be solving the problem of Aluminium Fin Tube in Ansys Workbench software.

77Problem Description: Bulb Heating coil Analysis in Ansys Workbench
Description of the Bulb Heating coil problem which will be solved in Ansys Workbench Software.

78Bulb Heating coil Analysis in Ansys Workbench
Students will be solving the problem of bulb Heating coil in Ansys Workbench software.

79Problem Description: Solenoid Analysis in Ansys Workbench
Description of the Solenoid problem which will be solved in Ansys Workbench Software.

80Solenoid Analysis in Ansys Workbench
Students will be solving the problem of Solenoid Analysis in Ansys Workbench software.
Social Network