4 out of 5
4
2 reviews on Udemy

Design the High Rise Buildings ( Level 2 )

Structural Engineering Software ( ETABS&SAFE ), from point of view of skyscrapers design engineer .
In this course the engineers will learn how to use the technical software with required codes to achieve the optimal and safer design to the high rise buildings .
To be structural designer
This course is a continuation of Design The High Rise Buildings Series ( Level 1 ,2 and 3 )

In This level you will learn how to revise your model and checking a lot of effected factors in structural design .Those factors will be mentioned below :

Part 1 ( ETABS Model )

  1. Check Load Combinations .

  2. Check Static Seismic Forces AS Per UBC97.

  3. Check Dynamic Seismic Forces AS Per UBC97.

  4. Check P-Delta Analysis

  5. Check the Mass Source.

  6. Check The Time Period.

  7. Check The Mode Shapes.

  8. Check The Wind Tunnel .

  9. Check The Base Shear As Per UBC97

  10. Check Displacement Per Wind As Per ASCE7-16

  11. Check The Overturning Moment.

  12. Check Seismic Drift As Per UBC97

  13. Design All Members Using ACI318M-14

Part 2 ( SAFE Model )

  1. Check The Materials, Slabs thickness, Rebars and loads

  2. Check Load Combinations As Per ACI318M-14

  3. Draw the strips for designing .

  4. Check Automatic Mesh.

  5. Check the Stiff Areas.

  6. Check The Deflection As Per ACI318M-14

  7. Design The Slab AS Per ACI318M-14

  8. Check The Punching AS Per ACI318M-14

At the end you will have the required information to start designing your first tower or skyscraper building with the acceptable values from designed codes.

Design The High Rise Buildings Level ( 2 )

1
Part 1 ( ETABS ),Lecture 1

Part 1 ( ETABS Model )

  1. Check Load Combinations .

  2. Check Static Seismic Forces AS Per UBC97.

  3. Check Dynamic Seismic Forces AS Per UBC97.

2
Part 1 ( ETABS ),Lecture 2

Part 1 ( ETABS Model )

  1. Check P-Delta Analysis

  2. Check the Mass Source.

  3. Check The Time Period.

3
Part 1 ( ETABS ),Lecture 3

Part 1 ( ETABS Model )

  1. Check The Mode Shapes

4
Part 1 ( ETABS ),Lecture 4

Part 1 ( ETABS Model )

  1. Check The Wind Tunnel (Using HFB Test).

5
Part 1 ( ETABS ),Lecture 5

Part 1 ( ETABS Model )

  1. Check The Base Shear As Per UBC97

  2. Check Displacement Per Wind As Per ASCE7-16

  3. Check The Overturning Moment.

6
Part 1 ( ETABS ),Lecture 6

Part 1 ( ETABS Model )

  1. Check Seismic Drift As Per UBC97

7
Part 1 ( ETABS ),Lecture 7

Part 1 ( ETABS Model )

  1. Design All Members Using ACI318M-14

8
Part 2 ( SAFE ),Lecture 1

Part 2 ( SAFE Model )

  1. Check The Materials, Slabs thickness, Rebars and loads

  2. Check Load Combinations As Per ACI318M-14

9
Part 2 ( SAFE ),Lecture 2

Part 2 ( SAFE Model )

  1. Draw the strips for designing .

  2. Check Automatic Mesh.

  3. Check the Stiff Areas.

10
Part 2 ( SAFE ),Lecture 3

Part 2 ( SAFE Model )

  1. Check The Deflection As Per ACI318M-14

  2. Design The Slab AS Per ACI318M-14

  3. Check The Punching AS Per ACI318M-14

11
Use attached ETABS Model and do all what you have learn in the last 10 lectures.
12
Introduction to Level 3 of Design High Rise Buildings Ser. ( Foundation Level )
You can view and review the lecture materials indefinitely, like an on-demand channel.
Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don't have an internet connection, some instructors also let their students download course lectures. That's up to the instructor though, so make sure you get on their good side!
4
4 out of 5
2 Ratings

Detailed Rating

Stars 5
0
Stars 4
1
Stars 3
1
Stars 2
0
Stars 1
0
3507f063f022168ade58a14d44e1f74a
30-Day Money-Back Guarantee

Includes

3 hours on-demand video
Full lifetime access
Access on mobile and TV
Certificate of Completion