Have a question?
Message sent Close
4.45 out of 5
4.45
63 reviews on Udemy

Learning AutoCAD Civil 3D for Road Design

In this course you will learn a practical way of designing a realistic road using AutoCad Civil 3D.
Instructor:
Engr. Zohaib Ali
191 students enrolled
Independently Design Highways and Motorways using AutoCad Civil 3D.
Basic Concepts of Highway Design
Creating surfaces in AutoCad Civil 3D using survey data and defining survey boundaries
Editing the AutoCad Civil 3D surface properties and adding surface labels such as spot elevations, slope labels, and contour labels
Designing and editing alignments in AutoCad Civil 3D and use additional labeling tools such as stationing, tangent, and curve labels
Making a surface profile in AutoCad Civil 3D, which is dynamically linked to the existing ground
Building assemblies and subassemblies for building corridor
Construct a corridor model in AutoCad Civil 3D and analyze its anatomy
Creating sample lines for design road cross-sections using AutoCad Civil 3D

Why Chose me?

I am a professional Engineer with degree in Transportation Engineering. Working in a multinational Consultancy Firm as a Senior Highway Design Engineer. I have been a part of many Mega projects of National and International Importance.

As a Highway Design Engineer, AutoCAD Civil 3D is my primary design tool. I have excellently developed my skills on AutCAD Civil 3D over a period of many years, working on several Highway Design projects.

What you will learn from this course:

After completion of this course, you will be able to independently design Highway/Roads using AutoCAD Civil 3D. You will be able to create surfaces, design horizontal and vertical alignments, corridors, cross-sections and much more.

Which version of AutoCAD Civil 3D is used?

I have used AutoCAD Civil 3D 2018 for recording this course but it is equally good for AutoCAD Civil 3D 2015 and later versions.

What are exactly the points covered in this course:

This course is divided into 10 sections and there are total 34 lectures, which are listed below:

  1. About this Course

  2. Understanding AutoCAD Civil 3D User Interface

  3. Editing Drawing Settings

  4. Importing / Creating Point Data

  5. Editing Points

  6. Exporting Points

  7. Points Display Management

  8. Adding User Defined Properties to Points

  9. Editing Label Style Defaults

  10. Description Keys

  11. Creating Point Groups

  12. Editing Point Groups

  13. Overview of Surfaces

  14. Creating Surface

  15. Adding Data to Surface using Point Files

  16. Adding Data to Surface using Contours

  17. Adding Data to Surface using Points Group

  18. Labelling Surfaces

  19. Overview of Alignments

  20. Creating Alignment from a Polyline

  21. Creating Alignment Using Alignment Creation Tool

  22. Alignment Labels and Label Styles

  23. Editing Alignments

  24. Overview of Profiles

  25. Creating Surface Profile and Profile Views

  26. Creating Design Profile

  27. Profile Labels and Label Styles

  28. Editing Profiles

  29. Creating Assemblies and Subassemblies

  30. Editing Assemblies and Subassemblies

  31. Creating Corridors

  32. Editing Corridors and Corridors Properties

  33. Creating Sample Lines

  34. Creating Cross Sections

The course is easy to follow; all of the resources needed are posted in the course content. What are you waiting for ! register now.

Who this course is for:

  • Transportation Engineering Students

  • Civil Engineering Students

  • Urban Engineering Students

  • Engineers working in Highway and Roads Industry

  • Surveyors

Introduction to this Course

1
About this Course

Brief introduction about this course

Introduction to AutoCad Civil 3D

1
Understanding AutoCAD Civil 3D User Interface

Understanding Use Interface

2
Editing Drawing Settings

Working with Points

1
Importing / Creating Point Data
2
Editing Points
3
Exporting Points
4
Points Display Management
5
Adding User Defined Properties to Points
6
Editing Label Style Defaults

Working with Point Groups

1
Description Keys
2
Creating Point Groups
3
Editing Point Groups

Working with Surfaces

1
Overview of Surfaces
2
Creating Surface
3
Adding Data to Surface using Point Files
4
Adding Data to Surface using Contours
5
Adding Data to Surface using Point Groups
6
Labeling Surface

Working with Alignments

1
Overview of Alignments
2
Creating Alignment from a Polyline
3
Creating Alignment Using Alignment Creation Tool
4
Alignment Labels and Label Styles
5
Editing Alignments

In this lecture you will learn how to make changes in the design alignment.

Working with Profiles

1
Overview of Profiles
2
Creating Surface Profile and Profile Views

In this lecture you will learn how to create existing ground profile.

3
Creating Design Profile

In this lecture you will learn how to create a design profile.

4
Profile Labels and Label Styles
5
Editing the Profiles

In this lecture you will learn how to make changes in the design profile.

Working with Assemblies and Sub-assemblies

1
Creating Assemblies and Subassemblies

You will learn how to create an assembly and how to add subassemblies.

2
Editing Assemblies and Subassemblies

You will learn how to make changes in assemblies and subassemblies.

Working with Corridors

1
Creating Corridors
2
Editing Corridors and Corridor Properties

Working with Cross Sections

1
Creating Sample Lines
2
Creating Cross Sections
You can view and review the lecture materials indefinitely, like an on-demand channel.
Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don't have an internet connection, some instructors also let their students download course lectures. That's up to the instructor though, so make sure you get on their good side!
4.5
4.5 out of 5
63 Ratings

Detailed Rating

Stars 5
33
Stars 4
10
Stars 3
16
Stars 2
0
Stars 1
4
b5a25a7fdffa581c2d0461450036843c

Includes

2 hours on-demand video
Certificate of Completion

About

AulaGEO is a Ge-engineering specialized academy.

Social Network

Udemy Black Friday Sale! Top Courses From $9.99