Have a question?
Message sent Close
4.4 out of 5
4.4
5 reviews on Udemy

Concrete Technology MCQ Practice Questions (Civil Eng)

Examination Preparation and Interview questions on Concrete Technology Practice questions for Civil Engineering
Instructor:
Manu Mitra
384 students enrolled
Concrete Technology for Civil Engineering

Concrete is a composite material composed of fine and coarse aggregate bonded together with a fluid cement (cement paste) that hardens (cures) over time. In the past limebased cement binders were often used, such as lime putty, but sometimes with other hydraulic cements, such as a calcium aluminate cement or with Portland cement to form Portland cement concrete (for its visual resemblance to Portland stone). Many other non-cementitious types of concrete exist with different methods of binding aggregate together, including asphalt concrete with a bitumen binder, which is frequently used for road surfaces, and polymer concretes that use polymers as a binder.

When aggregate is mixed with dry Portland cement and water, the mixture forms a fluid slurry that is easily poured and molded into shape. The cement reacts with the water and other ingredients to form a hard matrix that binds the materials together into a durable stone-like material that has many uses. Often, additives (such as pozzolans or superplasticizers) are included in the mixture to improve the physical properties of the wet mix or the finished material. Most concrete is poured with reinforcing materials (such as rebar) embedded to provide tensile strength, yielding reinforced concrete.

These questions will give you basic idea for Examination Preparation and/or interview on Concrete Technology Practice questions for Civil Engineering.

Please Note:

  1. These questions are only for practice and understanding level of knowledge only. It is not necessary that these questions may or may not appear for examinations and/or interview questions

  2. In this practice test, because of large amount of questions (around 234 questions) some of questions may have repeated

  3. I had to put as 70% pass rate because there may also be wrong answers from my side.

1
Concrete Technology (Civil Engineering) Practice Questions-I

Try your best to answer all the questions. All questions are important.

These questions and answers covers Concrete Technology Practice Questions for Civil Engineering

2
Concrete Technology (Civil Engineering) Practice Questions-II

Try your best to answer all the questions. All questions are important.

These questions and answers covers Concrete Technology Practice Questions for Civil Engineering

3
Concrete Technology (Civil Engineering) Practice Questions-III

Try your best to answer all the questions. All questions are important.

These questions and answers covers Concrete Technology Practice Questions for Civil Engineering

4
Concrete Technology (Civil Engineering) Practice Questions-IV

Try your best to answer all the questions. All questions are important.

These questions and answers covers Concrete Technology Practice Questions for Civil Engineering

5
Concrete Technology (Civil Engineering) Practice Questions-V

Try your best to answer all the questions. All questions are important.

These questions and answers covers Concrete Technology Practice Questions for Civil Engineering

You can view and review the lecture materials indefinitely, like an on-demand channel.
Definitely! If you have an internet connection, courses on Udemy are available on any device at any time. If you don't have an internet connection, some instructors also let their students download course lectures. That's up to the instructor though, so make sure you get on their good side!
4.4
4.4 out of 5
5 Ratings

Detailed Rating

Stars 5
2
Stars 4
2
Stars 3
1
Stars 2
0
Stars 1
0
3b0df293361eaa877106a0b1d1ff5842

About

AulaGEO is a Ge-engineering specialized academy.

Social Network

Udemy Black Friday Sale! Top Courses From $9.99